Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
ardour en français
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Tue Oct 29, 2019 12:59 pm    Post subject: ardour en français Reply with quote

Je voudrais mettre ardour en français, la petite case est bien sûr cochée dans les préférences. Ma gentoo est bien francisée, même si frescobaldi n’accepte pas les caractères spéciaux. Sinon, tout les softs, sauf certains plugins audio et synthés, que je n'ai jamais vu traduit, sont OK, de même pour mate.
Le fichier /home/bertrand/.config/ardour5/.translate est bien renseigné "1". Mes locales sont bonnes, et j'ai ajouté "export LANG="fr_FR.UTF-8" et export LC_COLLATE="C" " aux fichiers .bashrc et .profile.
Re-modif du fichier du fichier /etc/env.d/02locale avec " LANG="fr_FR.UTF-8" " UTF en majuscules, apparemment c'est mieux qu'en minuscules.
https://wiki.gentoo.org/wiki/UTF-8#Setting_the_locale
Je ne comprends pas, ardour est plus ou moins bien traduit, à par certains sous-menus.
_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Wed Oct 30, 2019 8:56 pm    Post subject: Reply with quote

Dans l'aide Ardour il y a:
Quote:
Internationalization
Use translations sets if Ardour should use a translated version of all the messages. The default (unchecked) is English (US). When checked, and if a language file exists for the system language, this file will be used to translate Ardour.

J'ai regardé un peu partout sur mon system, mais ne sachant pas trop quoi cherché...

Sinon je fais un dpkg-reconfigure locales :arrow:
_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Fri Nov 01, 2019 8:55 pm    Post subject: Reply with quote

Je cherche un équivalant de la commande "equery f ardour" sous debian ou rpm, pour pouvoir contrôler sur une autre distribution les fichiers installés, et voir s'il n'y a pas un fichier genre /etc/ardour5/ardour.menu.fr.
_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Fri Nov 01, 2019 10:37 pm    Post subject: Reply with quote

J'ai trouvé, enfin je crois, sous gentoo il n'y a pas de fichiers:
Code:
/usr/share/ardour5/local/fr/LC_MESSAGES/ardour5.mo
/usr/share/ardour5/local/fr/LC_MESSAGES/gtk2_ardour5.mo
/usr/share/ardour5/local/fr/LC_MESSAGES/gtkmm2ext3.mo

C'est ceux que j'ai trouvé sous une VM fedora31.
Je ne connais pas ces " .mo "
Par exemple comment remédier aux problème, dev-haskell/gtk2hs-buildtools et dev-cpp/gtkmm sont installés.

Code:
bertrand@poste01 ~ $ eix gtkmm
[I] dev-cpp/gtkmm
     Available versions: 
     (2.4)  2.24.5
     (3.0)  3.24.0 3.24.1
       {X aqua doc examples test wayland ABI_MIPS="n32 n64 o32" ABI_RISCV="lp64 lp64d" ABI_S390="32 64" ABI_X86="32 64 x32"}
     Installed versions:  2.24.5(2.4)(23:55:16 25/07/2019)(-doc -examples -test ABI_MIPS="-n32 -n64 -o32" ABI_RISCV="-lp64 -lp64d" ABI_S390="-32 -64" ABI_X86="64 -32 -x32") 3.24.1(3.0)(21:28:48 25/07/2019)(X -aqua -doc -test -wayland ABI_MIPS="-n32 -n64 -o32" ABI_RISCV="-lp64 -lp64d" ABI_S390="-32 -64" ABI_X86="64 -32 -x32")
     Homepage:            https://www.gtkmm.org
     Description:         C++ interface for GTK+

Code:
bertrand@poste01 ~ $ eix gtk2
[I] dev-haskell/gtk2hs-buildtools
     Available versions:  0.12.5.1-r1(0/0.12.5.1) 0.13.0.4-r3 0.13.2.2(0/0.13.2.2) {+closuresignals profile}
     Installed versions:  0.13.2.2(0/0.13.2.2)(09:25:37 31/10/2019)(closuresignals -profile)
     Homepage:            http://projects.haskell.org/gtk2hs/
     Description:         Tools to build the Gtk2Hs suite of User Interface libraries

* dev-perl/Gtk2
     Available versions:  1.249.920 {test}
     Homepage:            https://metacpan.org/release/Gtk2
     Description:         Perl bindings for GTK2

* dev-perl/Gtk2-AppIndicator
     Available versions:  (~)0.150.0-r1 {test}
     Homepage:            https://metacpan.org/release/Gtk2-AppIndicator
     Description:         Perl binding for the GTK2 AppIndicator

* dev-perl/Gtk2-Ex-PodViewer
     Available versions:  0.180.0-r2
     Homepage:            https://metacpan.org/release/Gtk2-Ex-PodViewer
     Description:         a Gtk2 widget for displaying Plain old Documentation (POD)

* dev-perl/Gtk2-Ex-PrintDialog
     Available versions:  0.30.0-r2 {cups}
     Homepage:            https://metacpan.org/release/Gtk2-Ex-PrintDialog
     Description:         a simple, pure Perl dialog for printing PostScript data in GTK+ applications

* dev-perl/Gtk2-Ex-Simple-List
     Available versions:  0.500.0-r2 {examples test}
     Homepage:            https://metacpan.org/release/Gtk2-Ex-Simple-List
     Description:         A simple interface to Gtk2's complex MVC list widget

* dev-perl/Gtk2-ImageView
     Available versions:  0.50.0-r2 {examples test}
     Homepage:            https://metacpan.org/release/Gtk2-ImageView
     Description:         Perl binding for the GtkImageView image viewer widget

* dev-perl/Gtk2-Notify
     Available versions:  0.50.0 {test}
     Homepage:            https://metacpan.org/release/Gtk2-Notify
     Description:         A perl interface to the notification library

* dev-perl/Gtk2-SourceView2
     Available versions:  (~)0.100.0-r1 {test}
     Homepage:            https://metacpan.org/release/Gtk2-SourceView2
     Description:         Perl binding for the C library gtksourceview

* dev-perl/Gtk2-Unique
     Available versions:  0.50.0-r2 {examples test}
     Homepage:            https://metacpan.org/release/Gtk2-Unique
     Description:         Perl binding for C libunique library

* dev-perl/gtk2-ex-formfactory
     Available versions:  0.670.0-r1
     Homepage:            https://www.exit1.org/Gtk2-Ex-FormFactory/ https://metacpan.org/release/Gtk2-Ex-FormFactory
     Description:         Gtk2 FormFactory

* dev-perl/gtk2-gladexml
     Available versions:  1.7.0-r1 1.7.0-r2 {examples test}
     Homepage:            http://gtk2-perl.sf.net/ https://metacpan.org/release/Gtk2-GladeXML
     Description:         Create user interfaces directly from Glade XML files

* dev-perl/gtk2-spell
     Available versions:  1.40.0-r1 1.40.0-r2 {test}
     Homepage:            http://gtk2-perl.sf.net/ https://metacpan.org/release/Gtk2-Spell
     Description:         Bindings for GtkSpell with Gtk2.x

* dev-perl/gtk2-trayicon
     Available versions:  0.60.0-r2 {examples test}
     Homepage:            http://gtk2-perl.sf.net/ https://metacpan.org/release/Gtk2-TrayIcon
     Description:         Perl wrappers for the egg cup Gtk2::TrayIcon utilities

* dev-perl/gtk2-traymanager
     Available versions:  0.50.0-r1 0.50.0-r2 {examples test}
     Homepage:            http://gtk2-perl.sf.net/ https://metacpan.org/release/Gtk2-TrayManager
     Description:         Perl bindings for EggTrayManager

* dev-ruby/ruby-gtk2
     Available versions:  3.3.2 (~)3.3.6 (~)3.3.7 {test RUBY_TARGETS="ruby24 ruby25 ruby26"}
     Homepage:            https://ruby-gnome2.osdn.jp/
     Description:         Ruby Gtk2 bindings

* games-util/xgame-gtk2
     Available versions:  (~)2.0.2-r1
     Homepage:            http://xgame.tlhiv.com/
     Description:         Run games in a separate X session

* x11-misc/gtk2fontsel
     Available versions:  (~)0.1-r1
     Homepage:            http://gtk2fontsel.sourceforge.net/
     Description:         A font selection tool similar to xfontsel

En regardant le USE des paquets, je ne vois pas trop ce qui pourrait correspondre à ardour?
Code:
bertrand@poste01 ~ $ eix ardour
[I] media-sound/ardour
     Available versions: 
     (5)    (~)5.12
     (6)    **9999*l
       {altivec doc jack CPU_FLAGS_X86="3dnow mmx sse"}
     Installed versions:  5.12(5)(08:10:37 01/11/2019)(jack -altivec -doc CPU_FLAGS_X86="mmx sse -3dnow")
     Homepage:            http://ardour.org/
     Description:         Digital Audio Workstation

_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Sat Nov 02, 2019 1:15 am    Post subject: Reply with quote

J'ai téléchargé l'archive sur le site d'ardour, il y a un fichier "TRANSLATORS"
Code:
Ardour User Interface Translation How-To

Ardour's user interface can be translated into many languages. For this the
application uses gettext engine. It works like this: there is a plain text
editable PO file for every language that contains a number of sequences like: a
line in English, a line in target language and a reference to a line in source
code where original text in English comes from. The build system then creates a
binary version of each PO file with MO file extension and places it in a system
directory where running instance of Ardour will pick and use it.

Ardour has two main PO files to translate: for user interface and for Ardour's
library. Some messages from the library are actually passed to user interface
(various warnings, for example), so ideally you have to translate both. For
example, Russian translations are located here:

gtk2_ardour/po/ru.po
libs/ardour/po/ru.po

There are few supplementation translations that can be found here (again,
showing the case for Russian):

libs/gtkmm2ext/po/ru.po

You might want to translate the appdata file as well which is here to help
distribution's packagers (showing the case for French)

gtk2_ardour/appdata/po/fr.po

Every PO file's name is a two-character code, e.g. 'de' for German, 'es' for
Spanish, and so on. However it's fairly common to have localizations for local
versions of a language, e.g. 'pt_BR' would stand for Brazilian Portuguese, and
'es_MX' would stand for Mexican Spanish. Please refer to ISO language code
table for details.

Here is the best workflow for existing translations.

1. Build Ardour  using './waf' command (this step is actually optional).

2a. If there is no existing translation for your language, run './waf i18n_pot'
which will generate a POT (.pot) file for each of the directories shown
above. For each directory you plan to translate, rename the POT file to end in
.po and then continue with step 3.

2b. If there is an existing translation for your language, run './waf
i18n_po' which will bring it up to date (along with all other PO files)

3. Open the relevant PO file in you PO editor of choice (see below).

4. Open Ardour, find something untranslated, locate this phrase in PO file,
translate.

5. Repeat previous step several times, save the PO file.

6. Run './waf i18n_mo' to regenerate binary MO files and 'sudo ./waf install'
to install them.

7. Restart Ardour to see what your translation looks like and whether it needs
fixes, e.g. has to be shorter.

Note that as of Ardour 4 the translations are only installed when you run
'./waf i18n' after './waf' and before 'sudo ./waf install'.

When you are done translating, it's best to get credited for your contribution.
Here is how you can do it:

1. Run 'git commit -a' (assuming you only modified translation files) and
describe the changes you made. Typically the commit message looks like
'Update German translation'. That should be sufficient.

2. Run 'git format-patch origin/master' (assuming you worked on a clone of the
master branch. That should generate a file called something like
'0001-Update-German-translation.patch'.

3. Run 'bzip2 0001-Update-German-translation.patch' to compress the file.

4. File a new bug report at http://tracker.ardour.org and attach the resulted
compressed file and tell either rgareus (Robin Gareus) or las (Paul Davis) on
the project's IRC channel (#ardour at irc.freenode.net) about your patch.

There are some more things you need to know.

1. Where does a phrase come from?

Often when you go through translation hunting for untranslated messages, you
stumble upon things you have no idea where they come from. To assist you there
most advanced PO editors have means to tell you which source code file it comes
from, or, in some cases, even show the context in source code. Ardour has
pretty much meaningful names for source code files, so it should help. If it
doesn't, please ask on IRC for help.

2. Variables

You will often meet things like "%1" or "%2" in the translation files. This is
a variable that should be left intact. Here is an example:

"Cannot load XML for session from %1"

When Ardour runs, this "%1" will be substituted with "Ardour" so that the whole
phrase will be "Cannot load XML for session from Ardour". If Mixbus (an
commercial Ardour's spin-off) runs, this will be "Cannot load XML for session
from Mixbus" instead. You get the idea. So just place this variable in your
translation in a way that makes the phrase sound natural in your language and
make sure you know where the phrase comes from (see above) so that you know how
to translate it correctly.

3. Plural forms

English has two plural forms, but many other languages have three and even four
plural forms. Some parts of Ardour's code respect that, but some not (check for
existing bug reports). A PO editor usually simplifies translating every plural
form by putting every plural form into a dedicated tab.

Not every PO editor can calculate the equation for the plural forms in your
language, but you can look it up in headers of PO files from some application
such a GIMP or Inkscape. Here is an example for Russian:

http://git.gnome.org/browse/gimp/plain/po/ru.po

"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2); 10<=4 && (n%100<10 || n"
"%100>=20) ? 1 : 2);\n"

4. Special case when translating

4a. slash
If you find something like : "Preferences/GUI", you will want to translate the whole thing.
Example for French : "Préférences/Interface graphique" .

4b. pipe
If you find something like : "Preferences|GUI", you will only want to translate the second part.
Example for French : "Interface graphique".


5. PO editors

It's really up to you which PO editor you choose. These ones are most popular:

poEdit. It works on Linux, Mac and Windows. The user interface is fairly simple.

Lokalize. Part of KDE desktop environment. It's a fairly advanced translation tool.

GTranslator. Usually considered as GNOME translation tool, but has very few
actual GNOME dependencies. Feature-wise it's somewhere between poEdit and
Lokalize.


Et j'ai regardé le ebuild, il y a bien des lignes avec " waf " mais pas de "./waf i18n_pot " , " ./waf i18n_mo " ni " ./waf install". J'ai mis des <====== dans le fichier.
Les seuls fichiers ".pot" sur mon système sont ceux de l'achive que j'ai téléchargé.

Code:
# Copyright 1999-2017 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2

EAPI=6
PYTHON_COMPAT=( python2_7 )
PYTHON_REQ_USE='threads(+)'
#EPYTHON='python2.7'
inherit eutils toolchain-funcs flag-o-matic python-any-r1 waf-utils     <========

DESCRIPTION="Digital Audio Workstation"
HOMEPAGE="http://ardour.org/"

if [[ ${PV} == *9999* ]]; then
   EGIT_REPO_URI="http://git.ardour.org/ardour/ardour.git"
   inherit git-r3
else
   KEYWORDS="~amd64 ~x86"
   SRC_URI="mirror://gentoo/Ardour-${PV}.0.tar.bz2 -> ${P}.tar.bz2"
   S="${WORKDIR}/Ardour-${PV}.0"
fi

LICENSE="GPL-2"
SLOT="5"
IUSE="altivec doc jack cpu_flags_x86_sse cpu_flags_x86_mmx cpu_flags_x86_3dnow"

RDEPEND="
   >=dev-cpp/glibmm-2.32.0
   >=dev-cpp/gtkmm-2.16:2.4
   >=dev-cpp/libgnomecanvasmm-2.26:2.6
   dev-libs/boost:=
   >=dev-libs/glib-2.10.1:2
   dev-libs/libsigc++:2
   >=dev-libs/libxml2-2.6:2
   dev-libs/libxslt
   >=gnome-base/libgnomecanvas-2
   media-libs/alsa-lib
   media-libs/aubio
   media-libs/flac
   media-libs/freetype:2
   media-libs/libart_lgpl
   media-libs/liblo
   >=media-libs/liblrdf-0.4.0-r20
   >=media-libs/libsamplerate-0.1
   >=media-libs/libsndfile-1.0.18
   >=media-libs/libsoundtouch-1.6.0
   media-libs/raptor:2
   >=media-libs/rubberband-1.6.0
   >=media-libs/taglib-1.7
   media-libs/vamp-plugin-sdk
   net-misc/curl
   sys-libs/readline:0=
   sci-libs/fftw:3.0[threads]
   virtual/libusb:0
   x11-libs/cairo
   >=x11-libs/gtk+-2.8.1:2
   x11-libs/pango
   jack? ( virtual/jack )
   >=media-libs/slv2-0.6.1
   media-libs/lilv
   media-libs/sratom
   dev-libs/sord
   >=media-libs/suil-0.6.10
   >=media-libs/lv2-1.4.0"

DEPEND="${RDEPEND}
   ${PYTHON_DEPS}
   jack? ( virtual/jack )
   sys-devel/gettext
   virtual/pkgconfig
   doc? ( app-doc/doxygen[dot] )"

pkg_setup() {
   if has_version \>=dev-libs/libsigc++-2.6 ; then
      append-cxxflags -std=c++11
   fi
   python-any-r1_pkg_setup
}

src_prepare(){
   eapply_user
   if ! [[ ${PV} == *9999* ]]; then
      eapply "${FILESDIR}"/${PN}-4.x-revision-naming.patch
      touch "${S}/libs/ardour/revision.cc"
   fi
   sed 's/'full-optimization\'\ :\ \\[.*'/'full-optimization\'\ :\ \'\','/' -i "${S}"/wscript || die
   MARCH=$(get-flag march)
   OPTFLAGS=""
   if use cpu_flags_x86_sse; then
      if [[ ${MARCH} == "i686" ]] || [[ ${MARCH} == "i486" ]]; then
         elog "You enabled sse but use an march that does not support sse!"
         elog "We add -msse to the flags now, but please consider switching your march in make.conf!"
      fi
      OPTFLAGS="sse"
   fi
   if use cpu_flags_x86_mmx; then
      if [[ ${MARCH} == "i486" ]]; then
          elog "You enabled mmx with i486 set as march! You have been warned!"
      fi
      OPTFLAGS="${OPTFLAGS} mmx"
   fi
   if use cpu_flags_x86_3dnow; then
      OPTFLAGS="${OPTFLAGS} 3dnow"
   fi
   sed 's/flag_line\ =\ o.*/flag_line\ =\ \": '"${OPTFLAGS}"' just some place holders\"/' \
      -i "${S}"/wscript || die
   sed 's/cpu\ ==\ .*/cpu\ ==\ "LeaveMarchAsIs":/' -i "${S}"/wscript || die
   append-flags "-lboost_system"
   python_fix_shebang "${S}"/wscript
   python_fix_shebang "${S}"/waf            <=============
}

src_configure() {
   tc-export CC CXX
   mkdir -p "${D}"
   waf-utils_src_configure \                     <=============
      --destdir="${D}" \
      --prefix=/usr \
      --configdir=/etc \
      --nls \
      --optimize \
      --lv2 \
      $(usex jack "--with-backends=alsa,jack" "--with-backends=alsa  --libjack=weak") \
      $(usex doc "--docs" '') \
      $({ use altivec || use cpu_flags_x86_sse; } && echo "--fpu-optimization" || echo "--no-fpu-optimization")
}

src_install() {
   waf-utils_src_install                          <================
   mv ${PN}.1 ${PN}${SLOT}.1
   doman ${PN}${SLOT}.1
   newicon "${S}/gtk2_ardour/resources/Ardour-icon_48px.png" ${PN}${SLOT}.png
   make_desktop_entry ardour5 ardour5 ardour5 AudioVideo
}

pkg_postinst() {
   elog "If you are using Ardour and want to keep its development alive"
   elog "then please consider to make a donation upstream at ${HOMEPAGE}."
   elog "Please do _not_ report problems with the package to ${PN} upstream."
   elog "If you think you've found a bug, check the upstream binary package"
   elog "before you report anything to upstream."
}

Il y a un "waf" dinstallé sur ma gentoo
Code:
dev-util/waf
     Available versions:  (~)1.9.14 {examples}
     Homepage:            https://waf.io/
     Description:         piece of software used to help building software projects

_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Mon Nov 04, 2019 2:42 am    Post subject: Reply with quote

Toujours pas de réponse... hummmmm
Peut on ajouter, spécifier ou affiner une localisation particulière pour un soft dans le make.conf?
En passant, est ce que tout est bien dans l'ordre? Je me souviens, que j'avais mis "COMMON_FLAGS=" après "FFLAGS" et que webkit-gtk ne voulait pas s'installer

Code:
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
#COMMON_FLAGS="-O2 -pipe"

COMMON_FLAGS="-O2 -march=bdver1 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
FCFLAGS="${COMMON_FLAGS}"
FFLAGS="${COMMON_FLAGS}"
#modif 31-10-2019
ACCEPT_KEYWORDS="~amd64"
GRUB_PLATFORMS="pc efi-64"
CHOST="x86_64-pc-linux-gnu"
MAKEOPTS="-j9"
VIDEO_CARDS="amdgpu radeonsi"
ALSA_CARDS="usb-audio"
INPUT_DEVICES="evdev keyboard mouse wacom"
LINGUAS="fr"
L10N="fr"
USE="python gtk lv2 ladspa jack pulseaudio networkmanager"

# NOTE: This stage was built with the bindist Use flag enabled
PORTDIR="/var/db/repos/gentoo"
DISTDIR="/var/cache/distfiles"
PKGDIR="/var/cache/binpkgs"

# This sets the language of build output to English.
# Please keep this setting intact when reporting bugs.
LC_MESSAGES=C

GENTOO_MIRRORS="ftp://ftp.free.fr/mirrors/ftp.gentoo.org/ http://ftp.free.fr/mirrors/ftp.gentoo.org/ http://gentoo.modulix.net/gentoo/ http://gentoo.mirrors.ovh.net/gentoo-distfiles/ https://mirrors.soeasyto.com/distfiles.gentoo.org/ http://mirrors.soeasyto.com/distfiles.gentoo.org/ ftp://mirrors.soeasyto.com/distfiles.gentoo.org/"

_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
El_Goretto
Moderator
Moderator


Joined: 29 May 2004
Posts: 3110
Location: Paris

PostPosted: Mon Nov 04, 2019 9:43 am    Post subject: Reply with quote

c4-53 wrote:
Toujours pas de réponse... hummmmm
Peut on ajouter, spécifier ou affiner une localisation particulière pour un soft dans le make.conf?
En passant, est ce que tout est bien dans l'ordre? Je me souviens, que j'avais mis "COMMON_FLAGS=" après "FFLAGS" et que webkit-gtk ne voulait pas s'installer

Code:
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
#COMMON_FLAGS="-O2 -pipe"

COMMON_FLAGS="-O2 -march=bdver1 -pipe"
CFLAGS="${COMMON_FLAGS}"
CXXFLAGS="${COMMON_FLAGS}"
FCFLAGS="${COMMON_FLAGS}"
FFLAGS="${COMMON_FLAGS}"
[...]

Si tes questions entraînent peu de réponse, à vu de nez je dirais que c'est parce que tu utilises un soft très particuliers et que donc personne ici n'a d'expérience en la matière. En tout cas ce serait l'explication la plus évidente.

Pour l'ordre dans make.conf, il n'y a pas d'ordre "globalement" entre les différentes variables (quand elles sont indépendantes) puisque le fichier est lu, puis portage bosse avec ce qu'il y a trouvé... sauf quand tu utilises, pour une variable donnée, le contenu d'une variable précédemment définie. Comme COMMON_FLAGS dans ton exemple. Dans ce cas oui, l'ordre des lignes a une importance. Si une variable est utilisée avant (au sens des "lignes", c'est à dire plus haut) d'avoir été définie, elle aura une valeur différente (souvent null) avant d'atteindre la ligne de sa définition, et c'est souvent une erreur. Ce n'est en rien spécifique à Portage, c'est du shell script (le format de ton fichier de config).
_________________
-Gentoo hardened [EoL]: µ-serv Gen8 G1610T, 8Go ECC ; NF9D-2700, 4Go
-FreeBSD 11/Vimage/Jails: DS61, i3 2100T, 16Go ; FreeNAS: µ-serv N40L, 8Go ECC
-Réseau: ERL-3 + ESL-24 + GS108Tv2
-NAS: RN312
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Mon Nov 04, 2019 1:43 pm    Post subject: Reply with quote

Merci pour ta réponse, C'est effectivement logique pour les scripts.

J’essaie de choper les bons automatismes pour résoudre mes problèmes.
Il y a des chances que le soucis se trouve au niveau du ebuild, mais là, c'est trop fort pour moi. C'est sans doute pas une bonne idée de le bricoler
Et je ne suis pas loin de l'indigestion de man page / wiki / forum. Allez un autre wiki pour le dessert...

J'ai essayé de poster une question sur le forum ardour et ils ont bloqués mon compte après le copier coller du "eix ardour"! :? La louze totale

Ensuite vu que l'archive d'ardour était téléchargée, passage par la case compilation.
Code:

./waf configure
Setting top to                           : /home/bertrand/Téléchargements/Ardour-5.12.0
Setting out to                           : /home/bertrand/Téléchargements/Ardour-5.12.0/build
Checking for 'gcc' (c compiler)          : /usr/bin/gcc
Checking for 'g++' (c++ compiler)        : /usr/bin/g++

Global Configuration
 * Install prefix                                    : /usr/local
 * Debuggable build                                  : True
 * Build documentation                               : False

Ardour Configuration
 * Will build against private GTK dependency stack   : no
 * Will rely on libintl built into libc              : yes
 * Will build against private Ardour dependency stack : no
Traceback (most recent call last):
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Scripting.py", line 97, in waf_entry_point
    run_commands()
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Scripting.py", line 151, in run_commands
    run_command(cmd_name)
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Scripting.py", line 143, in run_command
    ctx.execute()
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Configure.py", line 128, in execute
    super(ConfigurationContext,self).execute()
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Context.py", line 87, in execute
    self.recurse([os.path.dirname(g_module.root_path)])
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Context.py", line 128, in recurse
    user_function(self)
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/wscript", line 1016, in configure
    conf.check_cc(function_name='dlopen', header_name='dlfcn.h', lib='dl', uselib_store='DL')
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Configure.py", line 221, in fun
    return f(*k,**kw)
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Tools/c_config.py", line 463, in check_cc
    return self.check(*k,**kw)
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Configure.py", line 221, in fun
    return f(*k,**kw)
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Tools/c_config.py", line 368, in check
    ret=self.run_c_code(*k,**kw)
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Configure.py", line 221, in fun
    return f(*k,**kw)
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Tools/c_config.py", line 447, in run_c_code
    bld.compile()
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Build.py", line 188, in compile
    self.store()
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Utils.py", line 310, in f
    ret=fun(*k,**kw)
  File "/home/bertrand/Téléchargements/Ardour-5.12.0/.waf3-1.6.11-06ee4b7efbeab1252ed3b11499834d2a/waflib/Build.py", line 162, in store
    cPickle.dump(data,f)
AttributeError: Can't pickle local object 'Context.__init__.<locals>.node_class'

Il était tard, j'ai plié les gaules
_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
sebB
l33t
l33t


Joined: 02 Mar 2011
Posts: 778
Location: S.O. France

PostPosted: Mon Nov 04, 2019 8:12 pm    Post subject: Reply with quote

Y'a effectivement un problème sur l'ebuild qui n'installe pas les locales.

Je viens de test sur une arch et un dossier /usr/share/ardour5/locale/ est bien créé.

Le mieux est que tu ouvre un bug.

Sinon les vieux barbus vont bien t'aider à corriger l'ebuild :wink:

Pour patienter et car je suis sympa je te file le fichier locale arch que tu as juste à copier dans /usr/share/ardour5 de ta gentoo (c'est la meilleure solution mais elle devrait fonctionner).

locale
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Mon Nov 04, 2019 8:58 pm    Post subject: Reply with quote

Tu es sûr que ça fonctionne? Je ne l'ai pas dit, mais j'ai fait l'essai avec ceux de la VM fedora31, et ça ne marchait pas.
Après avoir trainé sur irc-freenode-ardour, ouverture de mon premier bug en dix huit ans de linux...après tout je bug plus que mon pc.
J'ai vu que l'on pouvait choisir FR, bizarre...Çà sent le coup d'épée dans l'eau, la doc était encore en anglais, non pas ça, j'use de mon droit de retrait, saturation numérique du signal d'entrée. :arrow:
_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
sebB
l33t
l33t


Joined: 02 Mar 2011
Posts: 778
Location: S.O. France

PostPosted: Mon Nov 04, 2019 9:40 pm    Post subject: Reply with quote

Je viens d'installer ardour sur une gentoo et j'ai juste copié le dossier locale de arch dans /usr/share/ardour5 de la gentoo.

Le 1er message qui était initialement en anglais est passé en francais.
Après je connais pas ton soft pour continuer mais ca te coute rien d'essayer
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Mon Nov 04, 2019 9:46 pm    Post subject: Reply with quote

Alors là "Château" c'est en français! Curieux avec les fichiers librazik aussi, mais pas fedora
_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Wed Nov 06, 2019 12:08 am    Post subject: Reply with quote

Quote:
Sinon les vieux barbus vont bien t'aider à corriger l'ebuild

Pas l'ombre d'une barbe, même pas d'une moustache à l'horizon, en même temps il fait nuit. Et ce genre de dénomination n'engage pas une "nana" (parce que vieille barbue c'est vraiment pas top) à proposé son aide... :arrow:
_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Wed Nov 06, 2019 3:42 pm    Post subject: Reply with quote

Je pensais essayer de trouver le ebuild d'ardour de gentoo studio, pour le comparer avec le mien, mais pas moyen de mettre la main dessus.
Ni dans le proaudio overlay
_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Sat Nov 09, 2019 4:27 pm    Post subject: Reply with quote

A mon avis les barbus en bermuda, tongs, teeshirt (aussi négligés que le bonhomme), ont été remplacés par des hipsters, plus soucieux de leurs look que de bricoler un ebuild pour le fun...
_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
sebB
l33t
l33t


Joined: 02 Mar 2011
Posts: 778
Location: S.O. France

PostPosted: Sun Nov 10, 2019 10:02 pm    Post subject: Reply with quote

Essaye peut-être l'ebuild de l'overlay de 4nykey

https://github.com/4nykey/4nykey
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Mon Nov 11, 2019 1:26 am    Post subject: Reply with quote

Merci, je vais regarder ça de plus près.
_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Mon Nov 11, 2019 1:52 pm    Post subject: Reply with quote

Le ebuild de 4nykey est bien différent de celui de la "team gentoo"
J'ai ajouté les lignes "PLOCALES=" et "l10n" à celle de "inherit eutils toolchain-funcs flag-o-matic python-any-r1 waf-utils l10n"


Code:

# Copyright 1999-2017 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2

EAPI=6

#modif ajout locales 11-11-2019
PLOCALES="
cs de el en_GB es fr it nn pl pt pt_PT ru sv zh
"

PYTHON_COMPAT=( python2_7 )
PYTHON_REQ_USE='threads(+)'
#EPYTHON='python2.7'

#ajout l10n 11-11-2019
inherit eutils toolchain-funcs flag-o-matic python-any-r1 waf-utils l10n

DESCRIPTION="Digital Audio Workstation"
HOMEPAGE="http://ardour.org/"

if [[ ${PV} == *9999* ]]; then
   EGIT_REPO_URI="http://git.ardour.org/ardour/ardour.git"
   inherit git-r3
else
   KEYWORDS="~amd64 ~x86"
   SRC_URI="mirror://gentoo/Ardour-${PV}.0.tar.bz2 -> ${P}.tar.bz2"
   S="${WORKDIR}/Ardour-${PV}.0"
fi

LICENSE="GPL-2"
SLOT="5"
IUSE="altivec doc jack cpu_flags_x86_sse cpu_flags_x86_mmx cpu_flags_x86_3dnow"

RDEPEND="
   >=dev-cpp/glibmm-2.32.0
   >=dev-cpp/gtkmm-2.16:2.4
   >=dev-cpp/libgnomecanvasmm-2.26:2.6
   dev-libs/boost:=
   >=dev-libs/glib-2.10.1:2
   dev-libs/libsigc++:2
   >=dev-libs/libxml2-2.6:2
   dev-libs/libxslt
   >=gnome-base/libgnomecanvas-2
   media-libs/alsa-lib
   media-libs/aubio
   media-libs/flac
   media-libs/freetype:2
   media-libs/libart_lgpl
   media-libs/liblo
   >=media-libs/liblrdf-0.4.0-r20
   >=media-libs/libsamplerate-0.1
   >=media-libs/libsndfile-1.0.18
   >=media-libs/libsoundtouch-1.6.0
   media-libs/raptor:2
   >=media-libs/rubberband-1.6.0
   >=media-libs/taglib-1.7
   media-libs/vamp-plugin-sdk
   net-misc/curl
   sys-libs/readline:0=
   sci-libs/fftw:3.0[threads]
   virtual/libusb:0
   x11-libs/cairo
   >=x11-libs/gtk+-2.8.1:2
   x11-libs/pango
   jack? ( virtual/jack )
   >=media-libs/slv2-0.6.1
   media-libs/lilv
   media-libs/sratom
   dev-libs/sord
   >=media-libs/suil-0.6.10
   >=media-libs/lv2-1.4.0"

DEPEND="${RDEPEND}
   ${PYTHON_DEPS}
   jack? ( virtual/jack )
   sys-devel/gettext
   virtual/pkgconfig
   doc? ( app-doc/doxygen[dot] )"

pkg_setup() {
   if has_version \>=dev-libs/libsigc++-2.6 ; then
      append-cxxflags -std=c++11
   fi
   python-any-r1_pkg_setup
}

src_prepare(){
   eapply_user
   if ! [[ ${PV} == *9999* ]]; then
      eapply "${FILESDIR}"/${PN}-4.x-revision-naming.patch
      touch "${S}/libs/ardour/revision.cc"
   fi
   sed 's/'full-optimization\'\ :\ \\[.*'/'full-optimization\'\ :\ \'\','/' -i "${S}"/wscript || die
   MARCH=$(get-flag march)
   OPTFLAGS=""
   if use cpu_flags_x86_sse; then
      if [[ ${MARCH} == "i686" ]] || [[ ${MARCH} == "i486" ]]; then
         elog "You enabled sse but use an march that does not support sse!"
         elog "We add -msse to the flags now, but please consider switching your march in make.conf!"
      fi
      OPTFLAGS="sse"
   fi
   if use cpu_flags_x86_mmx; then
      if [[ ${MARCH} == "i486" ]]; then
          elog "You enabled mmx with i486 set as march! You have been warned!"
      fi
      OPTFLAGS="${OPTFLAGS} mmx"
   fi
   if use cpu_flags_x86_3dnow; then
      OPTFLAGS="${OPTFLAGS} 3dnow"
   fi
   sed 's/flag_line\ =\ o.*/flag_line\ =\ \": '"${OPTFLAGS}"' just some place holders\"/' \
      -i "${S}"/wscript || die
   sed 's/cpu\ ==\ .*/cpu\ ==\ "LeaveMarchAsIs":/' -i "${S}"/wscript || die
   append-flags "-lboost_system"
   python_fix_shebang "${S}"/wscript
   python_fix_shebang "${S}"/waf
}

src_configure() {
   tc-export CC CXX
   mkdir -p "${D}"
   waf-utils_src_configure \
      --destdir="${D}" \
      --prefix=/usr \
      --configdir=/etc \
      --nls \
      --optimize \
      --lv2 \
      $(usex jack "--with-backends=alsa,jack" "--with-backends=alsa  --libjack=weak") \
      $(usex doc "--docs" '') \
      $({ use altivec || use cpu_flags_x86_sse; } && echo "--fpu-optimization" || echo "--no-fpu-optimization")
}

src_install() {
   waf-utils_src_install
   mv ${PN}.1 ${PN}${SLOT}.1
   doman ${PN}${SLOT}.1
   newicon "${S}/gtk2_ardour/resources/Ardour-icon_48px.png" ${PN}${SLOT}.png
   make_desktop_entry ardour5 ardour5 ardour5 AudioVideo
}

pkg_postinst() {
   elog "If you are using Ardour and want to keep its development alive"
   elog "then please consider to make a donation upstream at ${HOMEPAGE}."
   elog "Please do _not_ report problems with the package to ${PN} upstream."
   elog "If you think you've found a bug, check the upstream binary package"
   elog "before you report anything to upstream."
}





Le fichier gentoo ne contient pas de lignes "src_compile()" entre "src_configure()" et "src_install()" alors qu'il y a un i18n...
Code:
src_compile() {
   "${WAF_BINARY}" \
      --jobs=$(makeopts_jobs) --verbose \
      build $(usex nls i18n '') || die


ebuid 4nykey
Code:
# Copyright 1999-2019 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2

EAPI=6

PLOCALES="
cs de el en_GB es fr it nn pl pt pt_PT ru sv zh
"
PYTHON_COMPAT=( python2_7 )
PYTHON_REQ_USE='threads(+)'
EGIT_REPO_URI="https://github.com/${PN^}/${PN}.git"

inherit gnome2 python-any-r1 waf-utils l10n git-r3 toolchain-funcs
if [[ -n ${PV%%*9999} ]]; then
   EGIT_COMMIT="${PV}"
   SRC_URI="https://community.ardour.org/srctar/Ardour-${PV}.0.tar.bz2"
   KEYWORDS="~amd64 ~x86"
fi
SRC_URI="
   !bundled-libs? ( ${EGIT_REPO_URI%.git}/commit/5b03c41.patch )
"

DESCRIPTION="Digital Audio Workstation"
HOMEPAGE="http://ardour.org/"

LICENSE="GPL-2"
SLOT="${PV%%.*}"
IUSE="alsa bindist bundled-libs +c++0x debug doc jack hid lv2 nls phone-home sanitize sse vst"
REQUIRED_USE="
   || ( alsa jack )
"

RDEPEND="
   dev-cpp/gtkmm:2.4
   sci-libs/fftw:3.0
   media-libs/flac
   media-libs/libogg
   media-libs/fontconfig
   alsa? ( media-libs/alsa-lib )
   media-libs/aubio
   dev-libs/libxml2:2
   media-libs/libsamplerate
   media-libs/lv2
   lv2? (
      media-libs/suil
      media-libs/lilv
      media-libs/liblrdf
   )
   net-misc/curl
   media-libs/libsndfile
   jack? ( virtual/jack )
   !bundled-libs? (
      media-libs/libltc
      media-libs/qm-dsp
      hid? ( dev-libs/hidapi )
      media-sound/fluidsynth
   )
   media-libs/liblo
   media-libs/taglib
   media-libs/vamp-plugin-sdk
   media-libs/rubberband
   sys-apps/util-linux
"
DEPEND="
   ${RDEPEND}
   ${PYTHON_DEPS}
   dev-libs/boost
   nls? ( sys-devel/gettext )
   doc? ( app-doc/doxygen )
"

DOCS=( README TRANSLATORS doc/monitor_modes.pdf )

src_prepare() {
   default
   my_lcmsg() {
      rm -f {gtk2_ardour,gtk2_ardour/appdata,libs/ardour,libs/gtkmm2ext}/po/${1}.po
   }
   sed \
      -e 's:AudioEditing:X-&:' \
      -i gtk2_ardour/ardour.desktop.in
   use nls && l10n_for_each_disabled_locale_do my_lcmsg
   grep -rl '/\<lib\>' | xargs sed -e "s:/\<lib\>:/$(get_libdir):g" -i

   use !bundled-libs && has_version '>=media-sound/fluidsynth-2.0.0' || return
   eapply "${DISTDIR}"/5b03c41.patch
}

src_configure() {
   my_use() {
      usex $1 --${2:-${1}} --no-${2:-${1}}
   }
   local wafargs=(
      --configdir=/etc
      --noconfirm
      --versioned
      --freedesktop
      --keepflags
      --with-backends="$(usev alsa),$(usev jack)"
      $(usex lv2 '' '--no-lrdf')
      $(my_use lv2)
      $(my_use vst lxvst)
      $(my_use nls)
      $(my_use phone-home)
      $(my_use sse fpu-optimization)
      $(usex bindist '--freebie' '')
      $(usex debug '--debug-symbols --rt-alloc-debug' '')
      $(usex c++0x '--cxx11' '')
      $(usex sanitize '--address-sanitizer' '')
      $(usex bundled-libs '' '--use-external-libs')
      $(usex doc '--docs' '')
   )
   PKGCONFIG="$(tc-getPKG_CONFIG)" \
   waf-utils_src_configure "${wafargs[@]}"
}

src_compile() {
   "${WAF_BINARY}" \
      --jobs=$(makeopts_jobs) --verbose \
      build $(usex nls i18n '') || die
}

src_install() {
   waf-utils_src_install
   newicon gtk2_ardour/icons/${PN}-app-icon_osx.png ${PN}${SLOT}.png
   domenu build/gtk2_ardour/${PN}${SLOT}.desktop
   insinto /usr/share/mime/packages
   newins build/gtk2_ardour/${PN}.xml ${PN}${SLOT}.xml
}

_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Fri Mar 27, 2020 4:32 pm    Post subject: Reply with quote

J'ai reçu un mail du "bugs.gentoo.org" qui me demande
Quote:
@docs-team: please reassign to @proaudio
.
https://bugs.gentoo.org/show_bug.cgi?id=699318
N'étant pas un habitué des reports de bug, je ne pige pas trop ce qu'il veut, en fait si, mais pas comment modifier le "Assignee: Docs Team" en "Assignee: proaudio".
_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 8468
Location: ~Brussels - Belgique

PostPosted: Fri Mar 27, 2020 4:36 pm    Post subject: Reply with quote

Ce message est addressé aux administrateurs du bugzilla ;)
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
c4-53
n00b
n00b


Joined: 16 Jun 2019
Posts: 52

PostPosted: Fri Mar 27, 2020 5:01 pm    Post subject: Reply with quote

Ok merci, me voilà bien ballot, pas grave c'est pas la première fois...
_________________
gigabyte 970a-ds3p - fx8300 - 16Go - radeon rx550 - iiyama prolite xub2792qsu-b1 - rme hdsp9632 - focusrite octopre mk2
utilisateur de fedora / centos / debian / arch / ...calculate/ gentoo...
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum